AudioQuest Irish Red Subwoofer Interconnect

AudioQuest Irish Red Subwoofer Interconnect

Connect amplifiers, receivers, soundbars, and AVRs to a variety of subwoofers using the AudioQuest Irish Red RCA subwoofer cable. Featuring solid 0.5% Silver conductors that reduce distortion, Foamed-Polyethylene that maintains dynamic contrasts, and a Metal-Layer Noise-Dissipation that effectively dissipates high-frequency noise, this cable delivers clearer, naturally beautiful music, intelligible dialogue, and exhilarating sound effects.

Solid 0.5% silver conductors
Solid 0.5% silver-plated copper conductors provide a cost-effective way to enhance the “sharpness” of a subwoofer, improving articulation and intelligibility.

Metal-layer noise-dissipation
Achieving 100% shield coverage is straightforward. To prevent captured radio-frequency interference (RFI) from affecting the equipment's ground reference, AQ's Noise-Dissipation is essential. Traditional shielding systems typically absorb and then drain noise/RF energy to the component ground, distorting the critical "reference" ground plane, which in turn distorts the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

Foamed-polyethylene insulation
Any solid material adjacent to a conductor is part of an imperfect circuit. Wire insulation and circuit board materials absorb energy, some of which is stored and then released as distortion. Since air absorbs nearly no energy and polyethylene is low-loss with a benign distortion profile, foamed-PE, with its high air content, results in much less of the out-of-focus effect common in other materials.

Symmetrical coax geometry
Identical positive (+) and negative (-) conductors prevent the shield from functioning as an inferior audio conductor.

Cold-welded, gold-plated terminations
This plug design allows for a connection free of solder, a common source of distortion. Instead of solder, a high-pressure technique is used. Because the ground shells are stamped rather than machined, the metal can be selected for low distortion instead of machinability.

Specification : 

Metal: Solid 0.5% Silver
Noise Dissipation: Metal-Layer
Geometry: Symmetrical Coax
Terminations: Cold-Welded, Gold-Plated
Signal Type: Analog