IsoAcoustics GAIA Neo Series Isolation Feet

IsoAcoustics GAIA Neo Series Isolation Feet

Sold in a set of 4 

The GAIA Neo series is the next evolution in IsoAcoustics’ award-winning line of speaker isolation feet. Building on the proven legacy of the original GAIA models, GAIA Neo introduces a series of advanced upgrades including seamless height adjustment, improved isolation performance, simplified installation, and a sleek modern aesthetic in black or dark chrome.

Designed to replace factory-installed feet or spikes, the GAIA Neo decouples the speaker from the supporting surface to eliminate distortion caused by vibrations and reflections. With GAIA Neo, unlocking the full potential of your audio system is easier than ever before.

Patented technology. Proven performance
The GAIA Neo series builds on IsoAcoustics’ patented isolation technology with refinements that take performance even further. The GAIA Neo isolators offer increased isolation effectiveness, reducing internal reflections and mechanical vibrations with greater precision.

The GAIA Neo isolator is directional and designed to be aligned with the speaker’s drivers, helping to resist lateral movement and oscillations while maintaining accurate alignment with the listening position. By decoupling the speaker from its supporting surface, GAIA Neo reveals greater clarity, finer detail, and a more transparent soundstage with enhanced depth and realism.

Height adjustment
The isolator can be raised or lowered by up to 8.5mm (0.34″) without affecting its on-axis alignment. Simply rotate the lower ring to adjust.

Stable contact on uneven floors
Floors are often not perfectly level, and traditional rigid feet can struggle to sit flat. The GAIA Neo uses a bottom isolator that can pivot to maintain full contact with the floor even when the surface is slightly angled. This allows the speaker to remain stable and ensures consistent performance without rocking or compromised support.

Effortless positioning with Floor Sliders
Floor Sliders are the perfect companion for your GAIA Neo isolators, allowing you to easily reposition your speakers or audio equipment after installation. Designed to work directly on carpeted flooring, the sliders can also be used on hard surfaces by applying the included adhesive felt pads. This dual-surface flexibility ensures smooth movement whether you’re setting up on carpet or solid floors. Simply slide the speakers into place, then tilt one side at a time to remove the sliders once the final position is set.

Specification

GAIA I Neo
For floor standing speakers and subwoofers weighing 220 lbs (100KG) or less
Size: 3.0” / 77mm (W) x 2.0” / 52mm (H)
Height Adjustment: 0.34” (8.5mm)
Thread: M12-1.25, M8-1.25 and ¼”-20

GAIA II Neo
For floor standing speakers and subwoofers weighing 121 lbs (55KG) or less
Size: 2.6” / 65 mm (W) x 2.0” / 50 mm (H)
Height Adjustment: 0.34” (8.5mm)
Thread: M8-1.25, M6-1.0 and ¼”-20

GAIA III Neo
For floor standing speakers and subwoofers weighing 70 lbs (32KG) or less
Size: 2.2” / 56mm (W) x 1.8” / 45mm (H)
Height Adjustment: 0.34” (8.5mm)
Thread: M8-1.25, M6-1.0 and ¼”-20