Audio Technica AT-VM750xSH Moving Magnet Cartridge
Pickup available at Audio Connection
Usually ready in 5+ days
Audio Technica AT-VM750xSH Moving Magnet Cartridge
Audio Connection
515 Parramatta Road
Leichhardt NSW 2040
Australia
Audio Technica AT-VM750xSH Moving Magnet Cartridge
Audio Technica's VMx cartridge line features material and design updates that further improve the popular VM series. Including an improved coil design and a lightweight boron cantilever (instead of the standard aluminium) for better dynamics.
The AT-VM750xSH comes fitted with a Shibata stylus
This classic stylus design was one of the first to offer super-precise tracking that could capture all the high-frequency information. While the accuracy of the tracking may be surpassed by Microlinear and Special Line Contact designs, Shibata styli may not wear records out as much either. That makes them a balanced choice that combines excellent fidelity with longevity.
It's a nude diamond rather than a diamond-tipped shank, which means it's more durable. It also has the VMx boron cantilever; boron has less than half the mass of aluminium, making the stylus extremely responsive to the groove.
Specifications
| Cartridge & Stylus | |
|---|---|
| Frequency Response | 20 to 27,000 Hz |
| Channel Separation | 26 dB (1 kHz) |
| Vertical Tracking Angle | 20° |
| Tracking Force | 1.8 to 2.2 g (2.0 g standard) |
| Stylus Construction | Nude Shibata |
| Recommended Load Impedance | 47 k ohms |
| Coil Impedance | 3.2 k ohms (1 kHz) |
| DC Resistance | 750 ohms |
| Coil Inductance | 480 mH (1 kHz) |
| Output Voltage | 3.7 mV (1 kHz, 5 cm/sec.) |
| Output Balance | 1.0 dB (1 kHz) |
| Cantilever | 0.28 mm (0.011”) diameter solid boron |
| Static Compliance | 20 × 10-6 cm/dyne |
| Dynamic Compliance | 7 × 10-6 cm/dyne (100 Hz) |
| Dimensions | 29.0 mm (1.1”) × 18.3 mm (0.72”) × 17.5 mm (0.69”) (H × W × D) |
| Accessories Included | ・Cartridge installation screws** (M2.6) (10.0 mm (0.39”) × 2, 8.0 mm (0.31”) × 2, 5.0 mm (0.20”) × 2), Washer × 2, Non-magnetic screwdriver, Brush |
| Threaded Hole | M2.6 × 2 |
| Recommended Load Capacitance | 150 to 250 pF |
| Replacement Stylus | AT-VMN50xSH* (sold separately) |
| Stylus Curvature Radius | 2.7 × 0.26 mil |
| Type | VM |
| Weight | 8.8 g (0.31 oz) |
| Notes | *The replacement stylus of this product is used for AT-VMx series products. In this series, we offer replacement styli with different stylus tip structures and point shapes. **Cartridge installation screws (5.0 mm (0.20”)) x 2 are used to secure the cartridge in the box at the time of purchase. Be sure to keep and not lose these after removing the cartridge from the box. For product improvement, the product is subject to modification without notice. |