2-channel portable digital recorder
The Nagra Seven has been designed as the successor to the Nagra LB, ARES-C, ŒæARES-BB+ and Nagra V recorders. It is a flexible device and can be adapted to a multitude of specific applications depending on the internal options installed. Based on an extremely high performance, simple to operate platform the addition internal I.S.D.N. or SMPTE/EBU time code boards adapt it to either the broadcast or film / TV markets. Optional WiFi / 3G, internal editor and audio compression are also available, to further dedicate the device for particular applications
The Seven offers two analogue audio inputs and a single stereo digital input. It will record in PCM linear audio at sampling frequencies up to 192 kHz or in MPEG-1 layer II compressed audio formats if the compression option is installed. The inputs are equipped with traditional Nagra microphone preamplifiers for dynamic and phantom +48V microphones and offer a range of switchable sensitivities to accommodate all common microphones. AES-42 microphones can also be used as the recorder can supply the necessary 10V dc supply voltage on the AES input. The analogue LINE input will accept up to +24dB allowing it to be connected to a standard audio mixer in the field.
The Nagra Seven has a state-of-the-art color touchscreen allowing greater flexibility in the display modes and screens, but also eliminating all switches which are the weakest link in modern electronics. The audio levels, current operating mode and status of the recorder are shown on the touchscreen display mounted on the front of the unit. The screen is sunlight readable, and gives access to the entire menu structure of the recorder. Various programmable äóìshort cutsäó? are available giving many personalization possibilities.
The Nagra Seven is fitted with an internal 16GB micro SD flash memory, that can be increased by the user if desired. The main extractable media is an SD memory card which inserts into the slot on the left side of the recorder (see picture above).
USB 2.0 port
A micro-AB USB port allows the unit to be connected to a computer for file transfer. With an interface adapter, the same port can also be used to connect an external device such as a USB memory stick or computer keyboard for data entry.
Editing and communication
If the optional editing option is installed, then graphic editing of the audio files is possible on the main display. Once the editing of the audio material is complete, files can be transmitted to the studio either over IP (through the ethernet connection using the File Transfer Protocol äóìFTPäó? connection) or via a GSM phone using 3G or by Wifi (if the option is installed).
SMPTE / EBU Time code
The Nagra Seven has an optional internal time code board that works with all currently accepted frame rates including those for HD TV. It will handle both drop and non-drop frame rates, and will allow pull-up/down too.
Start / Stop
A 3.5mm miniature Jack socket is fitted for remote fader start/stop commands. This will allow the unit to be remotely controlled by a simple switch closure.
The Nagra Seven is supplied with a detachable battery box, into which 8 rechargeable äóìAAäó? cells can be installed. An optional lithium-polymer rechargeable battery pack, that will power the unit for about 7 hours is available. If phantom powering or transmission options such as WiFi or 3G are used the battery life will be reduced.
- Two discreet audio channels
- 16/24 bit, 192 kHz AD / DA
- User programmable Pre-recording buffer
- AES-42 compatible
- Internal sample rate converter
- Built-in channels matrix and M/S decoder
- Post-production compatible (BWF files) full iXML metadata
- Internal loudspeaker and headphone output
- SMPTE / EBU Time Code or I.S.D.N. options
- Ethernet (Ftp and VoIP)
- WiFi / 3G optionŒæ(Ftp and VoIP) / GSM
- USB 2.0 communication
- Large sunlight-readable color TFT touchscreen display
- Internal 16GB Flash memory and removable SD Flash
- Lightweight and battery operated
|Internal storage||Œæ||Micro SD Flash memory card|
|Removable media||Œæ||SD Flash memorycard|
|Disk format||Œæ||FAT 16 / 32|
|Recording Method||Œæ||Linear digital PCM, optional:MPEG 1 layer II|
|File type||Œæ||16 / 24 bit Broadcast Wave File BWF (WAV)|
|A/D & D/A||Œæ||24 Bit Sigma Delta|
|Bit rates||Œæ||32 kbits/s up to 384 kbits/sec|
|Sampling Rate||Œæ||44.1, 48 kHz, 88.2, 96, 176.4 and 192kHz|
|Recording capacity||Œæ||1hr at 24 bit 48 kHz per GB of memory|
|Display||Œæ||Color LCD touchscreen|
|Level meters||Œæ||On colour display|
|Digital input||Œæ||XLR 3-pole / AES 42|
|Analogue inputs||Œæ||2 x XLR Microphone (Dynamic, +48V Phantom) / line|
|Mic. input sensitivity||Œæ||2.8, 10 and 40 mV/Pa selectable|
|Mic. input noise||Œæ||Uin < 1ŒµV (2.8 and 10 mV) @ 220‘© Uin < 1.6ŒµV (40 mV)|
|Limiters||Œæ||On microphone inputs|
|Line input sensitivity||Œæ||Adjustable from -6 dBm up to +24 dBm for 0 dBFS recording|
|THD at 1 kHz||Œæ||2.8mV Mic <0.2%, 10mV Mic <0.1%, line <0.1% (measured on AES out)|
|Frequency response||Œæ||Mic, 10Hz äóñ 75 kHz (+0 äóñ 3dB), Line 10 Hz äóñ 90 kHz (+0 -1dB) (measured on AES out)|
|Signal-to-noise ratio||Œæ||>110 dB ASA äóìAäó?|
|Input level adj. range||Œæ||42 dB Mic and from -6 to +24 dB Line|
|Internal microphone||Œæ||On the front panel|
|Crosstalk||Œæ||Mic >70dB : Line > 110dB|
|Analogue line output||Œæ||XLR 4.4V max (+15 dBm)|
|Signal-to-noise ratio||Œæ||>100 dB|
|Digital output||Œæ||XLR AES-3 (24 bit or 16 bit)|
|Frequency response||Œæ||10 Hz äóñ 75 kHz (+0-3dB)|
|Headphones||Œæ||Stereo 6.3mm (Œ_äó?) Jack 50 ‘©|
|USB||Œæ||Micro AB connector|
|Dimensions||Œæ||165 x 175 x 65mm (W x H x D) (Incl. battery box)|
|Weight||Œæ||800g (1.75 lbs) (Incl. battery pack)|
|Power supply||Œæ||External 15V|
|Power Consumption||Œæ||Approximately 5W|
|Charge time||Œæ||Approximately 3 hours|
|Battery life||Œæ||>5 hours|
|Relative humidity||Œæ||From 10% to 99% (non condensing)|