VPI Prime Series Scout Turntable - As Traded
VPI Prime Series Scout Turntable - As Traded
VPI Prime Series Scout Turntable - As Traded
VPI Prime Series Scout Turntable - As Traded
VPI Prime Series Scout Turntable - As Traded
VPI Prime Series Scout Turntable - As Traded
VPI Prime Series Scout Turntable - As Traded

VPI Prime Series Scout Turntable - As Traded

$4,000.00

VPI Prime Series Scout Turntable - As Traded

Condition: Like New

The VPI Scout has all the features you want in a high-end turntable: an isolated motor, a precision machined platter, and the amazing JMW-9T tonearm. The sound is fast and detailed, closer than you might expect to the performance of VPI's reference HR-X at a fraction of its cost. 

For stability and damping, the Scout's chassis is made from 1 1/8" thick MDF bonded to a 12 gauge steel plate. The new massive platter is machined 1 3/8" thick 6061 aluminum with stainless steel damping mounted to an oil bath bearing by a number 2 Jacobs Taper for a very solid fit. The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft. The 600 RPM A/C synchronous motor is contained in a separate steel housing and drives the platter with smooth, quiet operation. The included platter mat is very good at damping record resonances.

The new JMW-9T tonearm is the perfect complement to the VPI Scout, offering all the advantages of a unipivot tonearm at a bargain price. The arm has an ultra low friction bearing mounted onto a solid stainless steel rod with a knurled ring to set VTA (Vertical Tracking Angle). As with the more expensive JMW-10.5i” and JMW-12.7” arms, the tonearm wand assembly of the JMW-9 can be removed and replaced in seconds. This allows instant cartridge changes with multiple arm wands. An RCA junction box allows any RCA-terminated interconnects to be used.

The Table:

  • 1/8" thick MDF bonded to a 12 gauge steel plate
  • Machined 1 3/8" thick 6061 aluminum platter
  • Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling
  • The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft
  • 300 RPM AC synchronous motor is contained in a separate steel housing and drives the platter with smooth, quiet operation
  • Includes a platter and record damping mat

The Arm:

  • New 9” JMW tonearm
  • No friction unipivot bearing mounted on a solid stainless steel shaft
  • VTA adjustable arm mount
  • Removable arm-wands allows you to change cartridges in less than 30 seconds
  • Precision adjustable counter weight allows you to get the most out of every cartridge you mount using its azimuth and tracking force adjustments
  • Adjustable Anti-skate option