Sunilda Class A Tube MM and MC Phono Stage - Two Inputs
Condition: Used in Excellent Condition
This is one fabulous looking and fabulous sounding piece of audio equipment which will bring your record collection to life. You can even connect two arms or turntables at the same time.
Sunilda is a three stage phono-preamplifier, based on 6922 (ECC88) and 12AX7 (ECC83) frame grid tubes, suitable for two MM- and MC-cartridges at the same time. Independently for the two phono inputs, impedance and capacitive load can be set separately and ‚on-the -fly‘ while listening. Thus the user can easily configure the unit to match the features of the cartridge by selecting the optimal input resistance and capacitance for each input separately!
Switches in front are found for: MM/MC mode for each input; input 1 or 2; selectors are used to select different resistor and capacitive input loads. In MM mode the gain will be 23 dB lower than MC and at a fixed input-impedance of 47 K.
In MC mode the preamp will have 20 dB higher gain and switchable input resistors and condensers. The RIAA de-emphasis is passive and split between the first and second stage. Dividing the RIAA network over two amplification stages lowers the insertion losses of the passive network dramatically. Furthermore, the design holds a total absence of feedback, thus increasing the overall dynamics.
Power supplies are solid state regulated. This is the best way to obtain a low noise and supply line with a very low impedance that will increase the performance in the lower frequency range. The power transformer is housed in a separate aluminum case.
Input selectable LOAD resistors: 47 R, 100 R, 220 R, 470 R, 1 K, 47 K ( for MM only )
Input selectable LOAD capacitors: 0 p, 100 p, 220 p, 470p, 1000p, 0 p
Frequency Response: max. +/- 0.3dB from 20Hz to 20KHz, typical +/. 0,2 dB
Subsonic filter roll-off: 20 Hz
Max output amplitude: 14V pk
RIAA accuracy max.: +/- 0,2 dB, R/C zero negative feedback type
Output impedance: 550 ohms
Bias operation: Pure class A
Distortion: MM 0,08 %, MC 0,05% (1Khz – 2V out)
S7N ratio: MM – 72 dB, MC – 82 dB
Circuit type: 3 stages SE concept, buffered ouputs
passive high accuracy RIAA network
Tubes: 2 x 6922, 2 x 12AX7
mode functions: Stand – by and mutePower supplies: high accuray solid state regulated
Power transformer: separate outside housed and shielded
Power requirements: 115/230 – 245 Ac – 50/60Hz
Powerconsumption: Watts: 50 VA
Dimensions: cm, W x H x D :42 * 32 * 14 (same as Eklipse)
Weight: Kg: 15 kg