The custom made 10äó? long-throw woofer driver features a massive magnet and voice coil to control the frequency response in the compact cabinet. This results in anŒæextremely fast response and high efficiency.Œæ
To ensureŒæperfect piston movement of the cone, it is manufactured in deep anodized aluminium.ŒæThe open basket design allows ventilation below the spider äóñ which, together with the vented pole piece, prevents over and under pressure from causing mechanical losses when the cone is moving.
ŒæThe driver is positioned off-centre for the driver to be situated as close to the floor and wall as possible. The compact design not only reduces cabinet resonances but it also allows for optimal coupling to the room.Œæ
The BW-2 has two input modes. If you set it to äóìLine in,äó? it can be used with conventional amplifiers and processors and has a frequency range from 25 to 200 Hz. As with regular subwoofers, you have control over level, frequency range, and phase adjustment.
If you have a Lyngdorf Audio amplifier, you can bypass the internal filters. Now the frequency range goes up to 800 Hz, and you can use the BW-2 as a boundary woofer to lift the performance of your system to a new level.
EVEN BETTER TOGETHER
Combining theŒæBW-2 with ourŒæMH-2 satellite speakersäóîalong with theŒæTDAI-2170Œæwith built-in RoomPerfect䋢 and digital crossoversäóîwill produce a full range system that simply outperforms anything in or above its price range.
The logistics are incredibly simple. Just hook up the MH-2ŒÇs and one or two BW-2ŒÇs to the TDAI-2170, switch the BW-2 to the äóìbypassäó? function, and select the preconfigured speaker setup in the TDAI-2170ŒÇs setup menu. Finish it off by running RoomPerfect䋢. Then sit back and enjoy.
|Œæ ||BW-2 |
|Description ||Active high bandwidth subwoofer |
|Amplifier ||400 watts |
|Driver ||10äó? long throw driver (+/- 15mm/0.6 in)Œæ |
íÖ 50mm / 2in voice coilŒæ
Cone Material: Deep Anodized aluminumŒæ
86oz / 2.4kg vented magnet
|Frequency Response ||25 to 200 Hz (using line in input) |
25 to 800 Hz (using bypass input)
|Sensitivity ||91dB (2.83V/1 m) sensitivity |
|Controls ||Bypass switchŒæ |
Phase control (0 to -180Œ_)Œæ
X-over frequency (60 to 200 Hz)
Auto on / always on
|Connections ||RCA / analog mono input |
|Dimensions (H x W x D) ||44 x 32.5 x 17.2 cmŒæ |
17.3 x 12.8 x 6.8 inches
|Finish ||High-gloss black or matte white |