Nagra CLASSIC INT integrated solid-state stereo amplifier.
Based on the acclaimed design of the Nagra CLASSIC AMP, this is a powerful integrated amplifier capable of driving the great majority of speakers on the market whilst delivering exceptional musicality.
The power amp section is identical to that of the esteemed Nagra CLASSIC AMP, whereas the preamplifier section is an entirely original design by Nagra R&D that sets a new standard for an integrated amplifier.
The Nagra CLASSIC INT offers a compact and simple set-up without the performance compromises that have sometimes been associated with integrated amplifiers.
|Power:||100 W rms into 8Ω|
|Sensitivity:||XLR input: Normal 2V; PRO 10V|
|RCA1 input: Normal 2V; High 3V|
|RCA 2 to 4 inputs: 2V|
|Bandwidth:||<10 Hz to 80 KHz, +0 / -3 dB|
|Signal to noise ratio:||Typically 110 dB measured in ASA A|
|THD+N:||<0.05% at 100 W|
|Input impedance:||>100 KΩ|
|Output impedance:||60 mΩ|
|Monitoring:||Stereo level meter|
|Red LED on the modulometer: clipping indication, temperature, saturation|
|Protection (deactivates amplifier):||Overheating: above 60°C (140°F)|
|DC protection for loudspeakers: above +/- 2.5 V DC|
|Power consumption:||400 W max (sine wave current draw complies with EN61000-3-2 regulation)|
|< 1 W in standby and auto|
|Operating range:||90-110 V, 110-132 V, 180-264 V: 50-60 Hz|
|RCA 1 to 4 (unbalanced)|
|Jack 3.5 mm (external remote IN and OUT)|
|Outputs:||Cardas CPBP (rhodium terminals)|
|Dimensions:||277 x 395 x 174mm (11 x 15.5 x 7 inches)|
|Weight:||18 Kg (40 lbs)|